RaceStudio 3 – User Manual

This is the quick documentation for AiM RaceStudio 3.

Note

The information included here is This manual is under construction under construction. It is provided by developers and intended as quick help or a quick reference for RaceStudio 3 windows.

Official AiM documentation is available on the AiM Web Page.

The online version of this manual can be accessed as an HTML page or as a PDF file.

Thank you, the AiM Software Team

software@aim-sportline.com

Please note that this manual is developed over several months. Some screen captures may have been taken from previous releases of RaceStudio 3.

Start with a Task

For a first session, follow From Device Setup to Your First Analysis. For a particular job, start with the procedure below and follow its links to the next step.

Your task

Start here

Set up an AiM device

Create a configuration, then save and transmit it.

Get recorded data onto the PC

Download from a device or card, then open the data in Analysis.

Open data already on the PC

Import and open session files.

Define a sensor

Create a custom sensor and assign it to a configuration channel.

Decode a CAN protocol

Create a custom protocol or inspect a recording in Sniffed Data Analysis.

Connect over Wi-Fi or change software preferences

Available Devices (Wi-Fi) and Preferences.

Finding Your Way Around

The sidebar follows RaceStudio 3’s main areas. On this page lists the sections of the chapter you are reading; Search docs searches the manual. Button and menu names in the instructions use the English interface. Hover over a toolbar icon in RaceStudio 3 to read its tooltip when you need to identify a command.