|
|
|
|
EVO5 |
|
The professional datalogger |
|
|
|
EVO5 is the evolution of the traditional datalogger that, all over the years, has become a standard de facto acquisition system in a huge amount of championships.
With its compact aluminum body, EVO5 can be easily placed in any vehicle.
Its configuration with the new RaceStudio 3 software is simple and immediate. |
|
| A wide range of sources for your data |
|
EVO5 samples all the information you need: data coming from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro, from the GPS09c included in the kit.
And from analog/digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 8 configurable analog channels, to the RPM input and to 4 wheel speed inputs. |
|
|
|
|
|
|
|
|
Two digital outputs |
|
EVO5 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE
type (switch to ground): they can be configured
in order to be turned on/off depending on
the value of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights, to activate/
de-activate a cooling fan or circulation pumps,
etc. when a certain event happens. |
|
|
|
CAN output |
|
With the CAN Output you can send messages
directly to an existing CAN network in order
to improve the range of vehicle control possibilities. |
|
|
|
|
|
| Internal SD card |
|
The internal SD card (not included in the box) permits to record all possible data you may ever need.
The card is protected by a waterproof door equipped with a sensor closing all files when you open it, to prevent any data loss possibility. No way to have a faster data downloading: you remove the SD and... it is done!
Of course a USB connection is available, too. |
|
| Wi-Fi connection |
|
Configure the system and download
your data over a secure 802.11 WiFi
connection, even if your car is 100
meters far from you. |
|
 |
|
|
|
|
|
Two multi-channel Motorsport
connectors |
|
Two multi-channel Motorsport connectors: simple and straightforward, one top quality harness for ALL your connections.
A 37 pins connector for main applications (power, CAN, AiM CAN network, etc.) and a 22 pins connector for additional functions like CAN2, digital outputs... |
|
|
|
|
|
| Expand your EVO5 as much as you need |
|
| Add expansion modules via our built-in CAN bus: |
|
Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. |
|
 |
|
|
LCU1S
Wide band Lambda controller with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. |
|
 |
|
|
SmartyCam 3 cameras
The on-board cameras that overlays on videos the data sampled
by your logger. |
|
 |
|
|
Memory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests. |
|
 |
|
|
| ... and all sensors you may need to improve the EVO5 performance. |
|
|
|
|
|
|
Available displays |
|
To visualize in real time all the data,
EVO5 can be connected to the visor
GS-Dash or to the Formula Steering Wheel 3,
our professional steering wheel
for Formula and Sports cars. |
|
|
|
|
| Download your data to a PC for a professional data analysis |
|
| Data recorded by EVO5 can be downloaded to PC and analyzed with the professional Race Studio Analysis software: graphs, histograms and tables will help you evaluate your performance, providing an objective support to avoid mistakes and improve your driving technique. |
|
| |
|
|
 |
|
|
|
|
|
|
