Installation kits for Solo/SoloDL
Ducati
Ducati
Ducati 848, 1098, 1198
For these Ducati models:
848 2007-2011
848 EVO 2007-2011
848 EVO Corse 2007-2011
1098 2007-2009
1098 S 2007-2009
1098 S Tricolore 2007-2009
1098 R 2007-2009
1198 2009-2011
1198 S 2009-2011
1198 S Corse 2009-2011
1198 R Corse 2009-2011
1198 SP 2009-2011
... the following kits are available:
Please note: For this model/year AiM recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls. AiM Tech srl will not be held responsible for any consequence that may result from the replacement of the original instrumentation cluster.
Please note: kits here described are only compatible with Ducati bikes that are equipped with DDA (Ducati Data Analyzer) connector.
Ducati
Ducati 899, 959, 1199, 1299 Panigale
For these Ducati models:
899 Panigale 2013-2015
959 Panigale from 2016
1199 Panigale 2012-2014
1199 R Panigale from 2015
1299 Panigale from 2015
... the following kits are available:
Please note: For this model/year AiM recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls. AiM Tech srl will not be held responsible for any consequence that may result from the replacement of the original instrumentation cluster.
Ducati Hypermotard 796
Ducati Hypermotard 796
For these Ducati models:
Hypermotard 796 2009-2011
... the following kits are available:
Please note: For this model/year AiM recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls. AiM Tech srl will not be held responsible for any consequence that may result from the replacement of the original instrumentation cluster.
Ducati Multistrada 1200
Ducati Multistrada 1200
For these Ducati models:
Multistrada 1200 2010-2011
... the following kits are available:
Please note: For this model/year AiM recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls. AiM Tech srl will not be held responsible for any consequence that may result from the replacement of the original instrumentation cluster.
© 2017 AiM Tech Srl - All rights reserved | Via Cavalcanti, 8 20063 Cernusco sul Naviglio - Italy | Tel. +39.02.9290571