Facebook Instagram Linkedin
RESERVED AREA
EN
ACC2
The compact Analog CAN Converter
ACC2 is available in two versions:
   Connectable to
AiM devices*
Other devices
   Analog channels
4 fully configurable channels, 200 Hz each: TC, TR, 0÷5 V, 0÷12 V
   External power
9÷15 V
   Connection
1 Analog 8 pins Binder 712
+ AiM CAN 5 pins Binder 712
1 Analog 8 pins Binder 712
+ USB CAN 7 pins Binder 712
   Material
PA6 30% glass
   Dimensions
44.0 x 38.0 x 19.8 mm
   Weight
50 g
   Waterproof
IP65
* Not compatible with MXL2, MXS and MXG.
As indicated in the table, ACC2 and ACC2 Open manage up to 4 analog inputs to a max frequency of 200 Hz each:
Thermocouples
Thermoresistances
0÷5 V
0÷12 V
SENSORS CONNECTIONS
ACC2 and ACC2 Open can manage many different sensors, from thermocouples to sensors whose output is 0÷12V.
Please, note that the thermocouples require dedicated compensated cables, so different kits and different harnesses and cables are available.
 
CHANNEL CONFIGURATION
Once the proper split harness has been chosen between the available range, you can configure the channels according to the kind of sensor you connect to the converters.
ACC2 and ACC2 Open support up to four K type thermocouples to manage the temperatures.
ACC2 OPEN VERSION
EASY CONFIGURATION
Every OPEN device can be connected to a PC via a dedicated USB cable:
CAN OUTPUT
ACC2 Open allows to build a CAN Output to communicate with external devices.
You can set bit rate protocol, field messages and CAN payload details.
The converter can also be used as an AiM Expansion, without any issues or limitations.
SUSPENSION ANALYSIS
ACC2 and ACC2 Open can be connected to Eclipse sensors.
All the acquired data by AiM linear potentiometers can be managed through the new Suspension Analysis Tool in RaceStudio 3, for an even more complete performance analysis software.
RaceStudio 3
Click to the picture to enlarge
ROGER CADDELL FREE ONLINE SEMINARS
Follow the Roger Caddell Free Online Seminars about ACC, the previous version of ACC2.
The webinar guest has been Chloé Lerin, winning Racing Data Engineer in the MotoAmerica series.
Follow the Roger Caddell Free Online Seminars about Open Products.
The webinar guests have been Bryc Talley, AiM Sports Technician, and Robbie Yeoman, AiM Sports Chief Tech Officer.
Please note that you can find ALL the seminars and much more on the AiM Sports YouTube page.