Spark Release¶
2024¶
1.2.68 - January, 19th 2024¶
General¶
Improvement speed handshake to determinate ECU type
Improved bike group list for same bike models with same attributes
Pin/Unpin “Table 2D control” and “DAQ control”
Add interpolation row/column/bidirectional on tables
Add gauge in Gear Calibration
Enabled User license support for the following models:
Yamaha YZ 250 F 2024
Yamaha YZ 450 F 2024
2023¶
1.2.64 - December, 13th 2023¶
General¶
Add cell Track TPS/RPM position in “Main Tables”.
Add cell Track degree/revolution on “Crank Tables”.
Add management for T500 ECU.
Add multiselection on switch table/2d visualization.
Add custom scale and zoom on 2d graph visualization.
Add gauge in TPS Calibration.
Improvement function “Edit Table” : add/add%/Set and linearization horizontal/vertical/bidirectional.
1.2.56 - September, 14th 2023¶
General¶
Improvement 2D view:
possibility to send modified value directly from graph view with Enter key.
Suggested name in “Save as” from new project.
Add both scrollbar in parameters visualization.
Enabled support for YAMAHA YZ450F 2023.
Add support for TaipanY V2.
Added interface notification during the map change event.
Focus maintained in the grid-view while the table selected is changing
Fixed minor bug.
1.2.52 - July, 27th 2023¶
General¶
Enabled User license support for the following models:
HONDA CRF250 2024,
HONDA CRF450L 2024,
HUSQ FC250 2024,
HUSQ FC350 2024,
HUSQ FC450 2024,
KTM SXF250 2024,
KTM SXF350 2024,
KTM SXF450 2024,
GASGAS MC250F 2024,
GASGAS MC450F 2024.
Added managment of Spare Channel for Barometric Sensor (AiM and custom)
Added WiFi module factory reset
Added shortcut to automatically open a new project, connect and read ECU data from the “Read ECU Identity” form
Added shortcut to clone single table from source map to destination map
Fixed minor bug.
1.2.49 - June, 28th 2023¶
General¶
Added management of Gear Sensor calibration for GasGas, KTM, Husqvarna
Bux fixing and general improvements.
1.2.42 - April, 21th 2023¶
General¶
Added management of Spare Low Side Strategy for Water Pump
Added shortcut to automatically open a new project from the “Read ECU Identity” form
Fixed minor bug.
2022¶
1.2.29 - December, 23th 2022¶
General¶
Add Compensation in Live view;
Fixed minor bug;
Fixed bugs in Live view;
Enabled User license support for the following models:
Yamaha YZ450F 2019;
Yamaha YZ450F 2020;
Kawasaki KX250 2022;
Kawasaki KX250 2023;
Kawasaki KX450 2022.
1.2.25 - November, 25th 2022¶
General¶
Fixed bug Lost focus on table after selectio of 2d visualization;
Fixed minor bug;
Improved “Update” function management;
Enabled User license support for the following models:
KTM EXC-F 250 2023,
KTM EXC-F 350 2023,
KTM EXC-F 450 2023,
KTM EXC-F 500 2023,
Husqvarna FE 250 2023,
Husqvarna FE 350 2023,
Husqvarna FE 450 2023,
Husqvarna FE 501 2023.
1.2.23 - October, 28th 2022¶
General¶
Bux fixing and general improvements.
Minimum drop sensor kill time changed from 10.0 s to 1.0 s;
New logo;
Minimum Quickshift cut time changed from 5 ms to 0 ms;
Enabled User license support for the following models:
MotoStudent 2023;
HONDA CRF250 2023;
HONDA CRF450L 2023;
HUSQ FC450 2023;
KTM SXF450 2023;
GASGAS MC250F 2023;
GASGAS MC450F 2023.
1.2.18 - July, 22nd 2022¶
General¶
Added Spark support to the HBSwitch’s new firmware remembering last configuration after power off;
Added two positions map switch management;
Added injection transient RPM tables (opening and closing);
Pre Moto3: extended “User injection table” correction range from (-7%, +7%) to (-12%, +7%).
1.2.12 - July, 6th 2022¶
General¶
Bux fixing and general improvements.
Enabled support Yarara for all licenses;
Added “Duplicate project” command under “File” menu.
Fixed bug where changes to map parameters (TC enabled, LC enabled, Gear strategy) were not saved.
1.2.6 - June, 10th 2022¶
General¶
Added live measures realtime charts;
Added base project version infos;
Added “Check maps conformity” command under “Compare with…” icon to check if the maps in the connected ECU are equal to the ones in the open project except for user’s editable;
Bux fixing and general improvements.
1.1.10 - May, 3rd 2022¶
General¶
Moto 3: extended “User injection table” correction range from (-7%, +7%) to (-12%, +12%).
1.1.9 - March, 3rd 2022¶
General¶
Fixed a bug where navigation treeview became unresponsive when loading or creating an HBSwitch project;
Fixed a bug where not all CAN aux channels were correctly configured in Moto3 and Pre Moto3 projects;
Fixed broken firmware documentation links in web update page.
2021¶
1.0.57 - November, 25th 2021¶
General¶
Enabled support for the following models:
Honda CRF 250R 2022;
Honda CRF 450R 2022.
1.0.56 - October, 21st 2021¶
General¶
Enabled support for the following models:
GasGas EC 350F 2021;
GasGas EC 350F 2022;
Husqvarna FC 350 2019;
Husqvarna FC 350 2020;
Husqvarna FC 350 2021;
Husqvarna FC 350 2022;
KTM 350 SX-F 2019;
KTM 350 SX-F 2020;
KTM 350 SX-F 2021;
KTM 350 SX-F 2022.
1.0.53 - September, 29th 2021¶
General¶
Added info message box after configuration, map and ECU write operations;
Released Taipan Y support for User and Tuner licenses;
Enabled support for the following models:
GasGas MC 250F 2022;
GasGas MC 450F 2022;
Husqvarna FC 250 2022;
Husqvarna FC 450 2022;
Husqvarna FE 350 2020;
Husqvarna FE 350 2021;
Husqvarna FE 350 2022;
Husqvarna FE 450 2020;
Husqvarna FE 450 2021;
Husqvarna FE 450 2022;
KTM 350 EXC-F 2020;
KTM 350 EXC-F 2021;
KTM 350 EXC-F 2022;
KTM 450 EXC-F 2020;
KTM 450 EXC-F 2021;
KTM 450 EXC-F 2022;
KTM 250 SX-F 2022;
KTM 450 SX-F 2022;
Yamaha YX250F 2019;
Yamaha YX250F 2020;
Yamaha YX250F 2021;
Yamaha YZ250F 2022;
Yamaha YZ450F 2021;
Yamaha YZ450F 2022.
1.0.49 - July, 29th 2021¶
General¶
Redesigned Spark update interface;
Base projects and firmwares are now distributed as standalone compressed archives downloadable and updatable from Spark;
Added support for Taipan ECUs;
Added support for Yamaha YZ450F 2021;
Improved management of non-latin alphabet languages;
Bug fixing.
Firmwares¶
Updated Cobra firmware to version 0.5.12;
Updated Taipan firmware to version 0.5.12.
1.0.28 - June, 7th 2021¶
General¶
Fixed a bug that would prevent Spark from running on Windows installed from a Japanese, Korean and Chinese (traditional and simplified) media (DVD or iso image).
Base projects¶
Honda CRF 450 R 2019: added full AiM standard (with 5 different maps) and Pro6 fuel optimized projects;
Honda CRF 450 R 2020: added full AiM standard (with 5 different maps) and Pro6 fuel optimized projects.