|
|
|
|
MXP/MXP 1.3* |
|
The 6" colour TFT dash logger |
|
|
|
| * The two versions have slightly different hardware but this does not change significantly the logger characteristics nor the user experience. |
|
|
|
|
|
MXP/MXP 1.3 offers 50% more display area than the 5'' MXS 1.2/1.3 display, in a similar dimension.
The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS09 Module, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections. |
|
| A wide range of data sources |
|
|
|
Click the icons and learn more:
|
|
|
|
 |
MXP/MXP 1.3 is also available in its STRADA version,
a dash for road use, with similar characteristics but without logging feature. |
|
|
|
|
|
|
|
|
Freely configurable pages |
|
You can define all the custom pages you wish,
choosing among a wide library
of page styles, defining which data
to be shown, their end of scale and measure units.
Swapping between pages can be managed
pushing one or two pushbuttons. |
|
|
|
|
|
|
High contrast TFT display |
|
A high contrast TFT display identifies
MXP/MXP 1.3 at the first glance.
An ambient light sensor keeps
the backlight at optimum brightness levels. |
|
|
|
|
Flexible alarms & custom street icons |
|
MXP/MXP 1.3 features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons. |
|
|
|
|
|
|
|
| Two digital outputs |
|
MXP/MXP 1.3 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE type
(switch to ground): they can be configured in order
to be turned on/off depending on the value
of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights,
to activate/de-activate a cooling fan
or circulation pumps, etc. when
a certain event happens. |
|
|
|
|
|
|
|
Camera inputs,
also for mirror camera |
|
Two analog camera inputs are available,
to swap your display into a mirror camera,
through pushbutton command
or event management. |
|
|
|
|
|
|
|
Integrated shift light array |
|
Choose from a host of advanced
multicoloured RGB shift light patterns
that can be customized as you like,
and for each unique gear when required. |
|
|
|
|
|
| Expand the system, according to your needs |
|
| Using the built-in CAN bus, you can add expansion modules to the MXP/MXP 1.3 to increment the performance and the data acquired: |
|
GPS09 Module
Thanks to GPS09 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique. |
|
 |
|
|
Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. |
|
 |
|
|
TC Hub
It adds 4 K thermocouples. |
|
 |
|
|
LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. |
|
 |
|
|
SmartyCam 3 cameras
The on-board cameras that overlays on videos the data sampled
by your logger. |
|
 |
|
|
Memory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests. |
|
 |
|
|
|
|
|
|
Connection example |
|
These are only some of the items that can be added to our MXP/MXP 1.3 for incrementing the performance
and the data acquired: |
|
|
 |
|
|
|
|
|
With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities. |
|
|
|
|
Race Studio 3,
the almighty software |
|
| Race Studio 3 is the heart of your MXP/MXP 1.3, managing all your activities related to: |
|
| Configuration |
|
| With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam 3 cameras. |
|
 |
| AiM LearnFast E-training Series |
| Check out how to use Race Studio 3 Configuration: Part 1 - Part 2 |
|
|
|
|
 |
|
|
 |
|
Analysis |
|
With Race Studio 3 you can also analyse all data recorded by MXP/MXP 1.3 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances. |
|
|
|
|
|
|
|
|
|
|
|
|
Makes it even more convenient
to configure, calibrate, and download your data
wirelessly, using a secure 802.11 WiFi
connection: no need to move your PC close
to the vehicle anymore, you can do it
from your van up to 50 meters away.
|
|
|
|
|
|
