EVO5
AiM products for car
AiM EVO4 acquisitore dati
EVO5 Data Logger
EVO5 is the evolution of the traditional datalogger that, all over the years, has become a standard de facto acquisition system in a huge amount of championships.
With its compact aluminum body,
EVO5 can be easily placed in any vehicle.
Its configuration with the new
Race Studio 3 software is simple and immediate.
A wide range of sources for your data
EVO5 samples all the information you need: data coming from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro, from the GPS08 Module included in the kit.
And from analog/digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 8 configurable analog channels, to the RPM input and to 4 wheel speed inputs.
ECU
connection
Second CAN
Sensors
GPS08
Module
CAN output
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
Two digital outputs
EVO5 features two digital outputs.
Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.
They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
Digital outputs
More info
internal SD card
The internal SD card permits to record all possible data you may ever need. The card is protected by a waterproof door equipped with a sensor closing all files when you open it, to prevent any data loss possibility. No way to have a faster data downloading: you remove the SD and... it is done!
Of course a USB connection is available, too.
WI-FI connection
Configure the system and download your data over a secure 802.11 WiFi connection, even if your car is 100 meters far from you.
WI-FI connection
Two  multi-channel Motorsports connectors
Two multi-channel Motorsport connectors: simple and straightforward, one top quality harness for ALL your connections. A 37 pins connector for main applications (power, CAN, AiM CAN network, etc. ) and a 22 pins connector for additional functions like CAN2, digital outputs...
Expand your EVO5 as much as you need
Add expansion modules via our built-in CAN bus:
Channel Expansion Channel Expansion
It permits to add 4 0-5Volt analog channels.
LCU-One Lambda Controller LCU-One Lambda Controller Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.
SmartyCam HD cameras SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.
... and all sensors you may need to improve the EVO5 performance.
Connection
example
 Download your  data to a PC for a professional data analysis
Data recorded by EVO5 can be downloaded to PC and analyzed with the professional Race Studio Analysis software: graphs, histograms and tables will help you evaluate your performance, providing an objective support to avoid mistakes and improve your driving technique.
Race Studio Analysis screenshot
© 2017 AiM Tech Srl - All rights reserved | Via Cavalcanti, 8 20063 Cernusco sul Naviglio - Italy | Tel. +39.02.9290571