Troubleshooting & FAQs Download Area
MyChron5/MyChron5 2T
MyChron5/MyChron5 2T
CHANNELS
My MyChron5 display shows EGT channel labelled as CHT: why?
Water temperature (WAT) shows unexpected values.
Exhaust gas thermocouple (EGT) shows unexpected values.
How can I perform gear calibration on MyChron5?
DOWNLOAD
Old files are overwritten by new ones.
I want to download data from MyChron5 using Data Key.
EXPANSIONS
I would like to see a second temperature channel (for example, EGT) on my MyChron5 display.
I would like to sample and show tires temperature on my MyChron5.
Which expansion modules are compatible with MyChron5?
INTERFERENCE
MyChron5 display is darkened, turns upside down, shows black lines and rolling numbers, turns off. Whatís going on?
The manual says to coil RPM cable many times, why AiM does not give this suggestion?
LAP FUNCTIONS
The track Iím racing on is not in Race Studio 3. What can I do?
How does different LAP detection modes work?
How does MyChron5 display lap times?
What is "Blind Time" and how can I set it?
POWER SOURCE
Is it possible to power MyChron5 with an external battery?
Is It possible to recharge MyChron5 without removing the battery?
Why canít I overtake 90% of battery charge?
RACE STUDIO 3
I canít transmit logos to MyChron5.
SWITCH-ON
My MyChron5 shows random data and LED blinks changing colour.
WI-FI
MyChron5 doesnít show Wi-Fi mode: "ON".
I canít remember the password and I canít access to MyChron5.
Which types are allowed when in the SSID and in the password settings?
Even though my PC is correctly connected to one AiM device via Wi-Fi, the User Interface of Race Studio 3
does not report it. Any idea about this issue?
< Go back
© 2017 AiM Tech Srl - All rights reserved | Via Cavalcanti, 8 20063 Cernusco sul Naviglio - Italy | Tel. +39.02.9290571